UHF Module
RVD-MD-1002 EmbedRead Multi-Point Module
Integrate several antenna positions into an embedded RFID equipment design. This module provides serial communication and control…
View specifications +
UHF ModuleRAVODEX CATALOG REFERENCE / RVD-MD-1001
RVD-MD-1001 EmbedRead Single-Point Module
Add UHF reading to a printer, handheld device or purpose-built equipment design. This embedded module exposes an antenna connection and a serial interface for a host-managed reading workflow. Evaluate the host firmware, supply arrangement, mechanical space and RF layout together so the module selection becomes a documented integration rather than an assumption of plug-in compatibility. The reference table lists RF Connector as “MMCX *1”. Confirm host wiring, power, firmware ownership and antenna layout, then evaluate the complete equipment design using representative tagged items and defined acceptance criteria.
Use this catalog code in your inquiry. Include the installation country, required interfaces and quantity.
RAVODEX SELECTION BRIEF
Make the requirement specific.
UHF RFID modules and interface boards for reader and device integration.
Discuss the open questionsBefore you quote RVD-MD-1001
- Which host firmware and antenna layout will control the embedded reading task?
- How does the listed RF Connector value “MMCX *1” fit your planned installation or integration?
- Who owns host firmware, RF testing and recovery when the embedded reader cannot confirm an identifier?
DOCUMENTED CAPABILITIES
Plan around the listed configuration.
- Single MMCX antenna connector
- TTL UART serial interface
- ISO 18000-6B and ISO 18000-6C
- Adjustable output power and RSSI
TECHNICAL REFERENCE
RVD-MD-1001 configuration details
| Parameter | Published specification |
|---|---|
| Dimention | 55.88mm×35.56mm×7.2mm |
| RF Connector | MMCX *1 |
| Communication Interface | TTL UART serial |
| Interface Cable | 12P 1.0mm pitch FFC cable |
| Operating Voltage | +4.5V～+5.5V |
| Standby Current | < 20mA |
| Operating Current | 5V power supply, 5 1100mA @ +30dBm, working peak current is about 1500mA |
| Chipset | Impinj Indy R2000 |
| Air Protocal | ISO/IEC 18000-6B，ISO/IEC 18000-6C/EPC C1G2/ C2G2 |
| Frequency | FCC 902MHz~928MHz，GB 920MHz~925MHz，ETSI 865MHz~868MHz, Japan Korea Malaysia Taiwan etc. |
| Max Baud rate | 460800bps |
| Receive Sensitivity | ≤-80dBm |
| Output Power | 0~33dBm(±1dB)adjustable |
| Tag RSSI | supported |
| Operating Temperature | 25℃~﹢70℃ |
| Storage Temperature | ﹣45℃~﹢85℃ |
| Operating humidity | ＜95% (﹢25℃) |
Product identity & original documents
- RAVODEX catalog code
- RVD-MD-1001
- Manufacturer reference
- HZ510
- Manufacturer
- Shenzhen Hopeland Technologies Co., Ltd.
The RAVODEX reference is a catalog SKU. It does not replace the equipment identity in manufacturer datasheets, approvals or service records.
Technical source: Hopeland published product information. Confirm the exact variant, accessories and current documentation in your quotation.
Compare uhf module.
UHF Module
RVD-MD-1003 EmbedRead Extended-Zone Module
Collect tag observations from a larger set of antenna points within purpose-built equipment. This UHF module supplies a serial…
View specifications +
UHF Module
RVD-MD-1004 CabinetRead Embedded Module
Design a reader architecture for a cabinet or fixed identification device with multiple antenna positions. This UHF module supplies…
View specifications +YOUR NEXT PROJECT
Request a recommendationSpecify RVD-MD-1001 for your project.
Bring the read point, installation country and host requirements into the quotation. Confirm the exact equipment and documentation before ordering.